Time: 1h
Progress:
SetupMeasure and roughly cut 280mm wide board(1200mm long) with circular saw
Route-trim 2mm off one edge
Route-trim piece to final dimension – 275mm (1200mm long)
Use 275mm wide piece as a template to route second piece
 |
| Cut Schedule 1 Two pieces of 600x1200x18mm MDF Plus 12mm MDF enough for two 216x356mm (glued to Baffle for total thickness of 30mm) |
 |
| Cut Schedule 2 - alternative |
 |
| The Start - two sheets of MDF 600x1200x18mm |
 |
| Rough 280mm wide cut |
 |
| One cut down - few more to go - getting there! |
 |
| Using straight edge as a guide route off 2mm. |
 |
| First finished edge... phew! |
 |
| Measure and mark final dimension of 275mm |
 |
| Align marks to straight edge |
 |
| First piece finished to final dimension with two routed edges |
 |
| Use first piece as a template and route edges of second piece. Now, the two boards are identical. |
 |
| Beer Time!!! |
